GB-1GBHB2302 / HBZ2601HB2302HBZ2601GBOWNER’S MANUALBLOWERS 848L0B93A1 (411)
GB-10HB2302 / HBZ2601RESTARTING ENGINE WHILE ENGINE IS HOT1. When restarting the engine immediately after stop-ping it, leave the choke open.2. If the
GB-11GBHB2302 / HBZ2601 WARNINGMake sure that the engine has stopped and iscool before performing any service to theblower. Contact with rotating blow
GB-12HB2302 / HBZ2601• Note that failing to do so may result in the enginecatching on fire. IMPORTANT• Before starting operation, always make sure to
GB-13GBHB2302 / HBZ2601AIR INTAKE SCREEN (AIR INLET NET) IMPORTANT•Blowing air is taken in from the air inlet net. When airflow has dropped down durin
GB-14HB2302 / HBZ26012. Align the (5) indicated on the vacuum pipe (4)with the indicated on the blower. Then insert thevacuum pipe (4) into the blo
GB-15GBHB2302 / HBZ26013. Fit the elbow groove with discharge port projection,turn the elbow and mount the dust bag to the mainunit.DUST COLLECTING OP
GB-16HB2302 / HBZ2601Limited warrantyShould any failure occur on the product under normal oper-ating conditions within the applicable warranty period,
GB-2HB2302 / HBZ2601EXPLANATION OF SYMBOLS AND SAFETY WARNINGSWARNING!!!RISK OF DAMAGING HEARINGIN NORMAL CONDITIONS OF USE, THIS MACHINEMAY INVOLVE A
GB-3GBHB2302 / HBZ26011. Parts location1. Stop Switch2. Throttle Lever3. Air Intake Screen (Air inlet net)4. Spark Plug Cap5. Recoil Starter Knob6. Ai
GB-4HB2302 / HBZ2601Model HB2302 HBZ2601Dimensions (LxWxH) mm 325 x 230 x 360 327 x 268 x 360Dry weight (w/o tube and nozzle) kg 3.7 3.9Fuel tank capa
GB-5GBHB2302 / HBZ26011. Read this manual carefully untilyou completely understand andfollow all safety and operatinginstructions.2. Keep this manual
GB-6HB2302 / HBZ2601morning or late at night whenpeople might be disturbed. Com-ply with times listed in local ordi-nances.2. To reduce sound levels,
GB-7GBHB2302 / HBZ2601c) Do not allow bystanders in workarea.d) Do not point the blower nozzle inthe direction of people or pets.e) Always check to be
GB-8HB2302 / HBZ26016. Set upBLOWER PIPE• Align groove in blower pipe with projection on blowerhousing (or another blower pipe) and slide the pipeonto
GB-9GBHB2302 / HBZ2601 RECOMMENDED MIXING RATIO GASOLINE 50 : OIL 1• Exhaust emission are controlled by the funda-mental engine parameters and com
Komentáře k této Příručce