RedMax BCZ350S Návod k obsluze stáhnout pdf (Strana 10)

US-8

BCZ350S

3. For safe operation

■ Maintenance

1. In order to maintain your product in proper working order,

perform the maintenance and checking operations described in

the manual at regular intervals.

2. Always be sure to turn off the engine and disconnect the spark

plug before performing any maintenance or checking

procedures.

The metallic parts and engine cover reach high temperatures

immediately after stopping the engine.

3. Examine the product at intervals for loose fasteners and rusted

or damaged parts. Use special care around the fuel line, the

muffler, and the ignition wiring.

4. When replacing the any other part, or any lubricant, always be

sure to use only RedMax products or products which have been

certified by RedMax for use with the RedMax product.

5. In the event that any part must be replaced or any maintenance

or repair work not described in this manual must be performed,

please contact a representative from the store nearest RedMax

authorized servicing dealer for assistance.

6. Do not use any accessory or attachment other than those

bearing the RedMax mark and recommended for the unit.

7. Under no circumstances should you ever take apart the product

or alter it in any way. Doing so might result in the product

becoming damaged during operation or the product becoming

unable to operate properly.

■ Disposal

When disposing your machine, fuel or oil for the machine, be sure

to allow your local regulations.

■ Machine’s safety equipment

This section describes the machine’s safety equipment, its

purpose, and how checks and maintenance should be carried out

to ensure that it operates correctly. See the “Parts location”

section to locate where this equipment is positioned on your

machine.

The life span of the machine can be reduced and the risk of

accidents can increase if machine maintenance is not carried out

correctly and if service and/or repairs are not carried out

professionally. If you need further information please contact your

nearest service workshop.

All servicing and repair work on the machine requires special

training. This is especially true of the machine’s safety equipment.

If your machine fails any of the checks described below you must

contact your service agent. When you buy any of our products we

guarantee the availability of professional repairs and service. If the

retailer who sells your machine is not a servicing dealer, ask him

for the address of your nearest service agent.

• Never use a machine with faulty safety equipment. The

WARNING

IMPORTANT

WARNING

machine’s safety equipment must be checked and

maintained as described in this section.

• If your machine fails any of these checks contact your

service agent to get it repaired.

1. Throttle lockout

The throttle lockout is designed to prevent accidental operation

of the throttle control. When you press the lock (A) (i.e. when

you grasp the handle) it releases the throttle control (B). When

you release the handle the throttle control and the throttle

lockout both move back to their original positions. This

movement is controlled by two independent return springs. This

arrangement means that the throttle control is automatically

locked at the idle setting.

Make sure the throttle control is locked at the idle setting when

the throttle lockout is released.

Press the throttle lockout and make sure it returns to its original

position when you release it.

Check that the throttle control and throttle lockout move freely

and that the return springs work properly.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 119 120

Komentáře k této Příručce

Žádné komentáře

RedMax BCZ350S Návod k obsluze Strana 10

Komentáře k této Příručce

Související produkty a manuály pro Zastřihovače trávy RedMax BCZ350S